4-ea Q102 clips. Sold car, so no longer need these. Does not include towers or tower pads. Fit my old 2008 VW GTI, check Yakima website to see if these will fit your car.
Ready to run, perfect hot street setup. 60cc chambers, with 82 stroke and 50 thousandths deck you get 9.3 to 1... New keepers and kmotion K800 springs are installed set up for 600 thou or less lift Purchased in the 2003-2004 timeframe for a hot street build and never used. 44 x 37.5 stainless valves with really nicely match ported big beef manifolds. The CNC porting was massaged a little by Den...
Original bus bay window brown chair. Ready to slide match the rails of your bus seat area. If you have one that needs replacing works for driver or passenger this is a very nice one. Clean and ready to go. Fits VW 1976 - 1979 Bus
last weekRenton, WA+13 milesAuto Parts for Sale
Everything is there: carburetor, VW shroud, VW heater boxes with flaps, cooling tin, generator, long block, etc. Unlike every other post you'll read, this engine did NOT run when parked. You'll definitely need to look into that- (it was a dropped valve). The car also had a hard life, from what I can gather about the owner, so who knows what kind of torture is hiding inside this crank case.
last weekRenton, WA+13 milesAuto Parts for Sale
Picked up a set of Pretorias the other day so these need a new home. Wheels have 7500 miles on them and the tires are just a hair shy of 9/32nds on all 4. Wheels are in good used condition, no curbage or bends, probably have a rock chip or two from normal use. One tire was plugged recently after I found a nail in it, holds air just fine now. I am located in Renton WA and can meet up within 20-3...
Rear bumperJeep Wrangler Sahara 2019 take offsCame off of a JL wrangler Great shapeRear bumper and mounting bracketsHave many other wrangler stock take off parts available ShocksSpringsBracketsSpare tire mountsLocated in port orchard but come to auburn several days a week
Hello, I'm selling my AWE Tuning Switchpatch exhaust w/chrome tips 102mm for the Mk7 Golf R. Exhaust is only 6 months old. https://www.awe-tuning.com/mk7-golf-r-exhaust Works like a champ and sounds great; I'm only selling it because I traded in my 2016 for the new facelifted 2018 R, and unfortunately, VW decided to make the rear diffuser on the Mk7.5's JJJUUUUUSSSSSSTTTTTT slightly wider so th...
As noted in the title, my wife's mkV rabbit was traded in for the new Q5 family car last year and they've sat on my shelves since.. Wheels and tires: 5x112 185/60/r15: $200 for all 4 with studded tires OBO 1stvwparts listing for each steelie: Wheel, steel, Wheel, steel 15" WHEELS Wheels Volkswagen Rabbit 2006-2009 List Price : $84.00 Your Price : $60.48 Oem Wheel Covers: $50 Listed on 1stvwpart...
Fore sale is a good condition 3" SPM down pipe and exhaust system for the MK6 GTI (fits CCTA or CBFA engine codes). This is their street version with resonators in the long after cat section as well as mid or "J" pipe and at the rear but with a cat-less section . All V-band connections. No issues with the system, I'm slowly putting my car back to stock. I bought this system used just over a yea...
last weekRenton, WA+13 milesAuto Parts for Sale
Had this on our 2013 VW CC for a while but now that car is gone and this wont fit any of my current VW's. Located in Renton and looking for a local sale, will entertain trades toward parts that will fit a 2016 Tiguan or a MK7.5 Golf R. Link to the intake in question: https://volant-com.myshopify.com/col...-intake-117206 SOLD, SOLD, SOLD Asking $100 cash.
last weekRenton, WA+13 milesAuto Parts for Sale
Picked up a set of Pretorias the other day so these need a new home. Wheels have 7500 miles on them and the tires are just a hair shy of 9/32nds on all 4. Wheels are in good used condition, no curbage or bends, probably have a rock chip or two from normal use. One tire was plugged recently after I found a nail in it, holds air just fine now. I am located in Renton WA and can meet up within 20-3...
last weekEdmonds, WA+14 milesAuto Parts for Sale
All parts are pick up only in Edmonds,WA due to weight. Complete spindle,hub,caliper, etc from a Corrado allows to run 11 inch rotors, bolt on for Mk2,mk3 Wheel bearings are good, so are the brake lines. So technically just buy some rotors and pad and you are good to go. But would replace the bearings while the spindles are off already. $200 firm Griling 60 calipers, these are dual piston bolt ...
last weekEdmonds, WA+14 milesAuto Parts for Sale
Ronal Aero R50 16x7.5 et38 4x100 with Yokohama S.Drive 195/40/16 with less than 2,000 miles on them. Also includes a 5th never been mounted wheel. $1400 picked up in Edmonds,WA For $40 more will 3mm spacers and black extended lug nuts Only partial trade I might consider at all is minty 15 BBS RA s. Sent from my iPhone using Tapatalk
Wiring harness, transmission, haldex, and engine gone. Only interior and cosmetics available. See photos: https://drive.google.com/drive/folde...atJRDqjMk_ZTzE Contact: 253-355-8999
UPDATE 4/28 SOLD Authentic Euro cherry LED taillights without fog. Reverse and turns replaced with deautoleds. Include harnesses - $600 Pics: https://1drv.ms/u/s!Apcq-5Q_XWKYi8tJ...APXKQ?e=6g0Qid
I was this guy https://forums.vwvortex.com/showthre...#post110174161 But I traded my 2012 for a 2019 Golf R, so this unit is available. In like new condition, comes with original harness and usb/aux adapters, coded for dynaudio, should be plug and play in a Golf R provided you have the right canbus module - $1250.
-VR6 12 valve bored 1mm over to a 2.9L with balanced rotating assembly using 82mm JE 9:1 forged pistons and ARP head studs, and ARP rod bolts. - ported head with Techtonics TT268 cams, H/D springs, titanium retainers, 2mm bigger intake and 1.8mm bigger exhaust valves. New lightweight lifters. New timing set with chains, tensioners, and guides. All short block and head machine work done by Jerry...